ITS-FRANCE - Trancheuses

CONTROL OF DEPTH
Double-acting jack on the trenchers actuated manually by the distributor of the tractor. In laser option automatic check with electromagnetic sluice gates.

COIL FOR NARROW TRENCHES
The wheel of cutting completely locked up comprises ten small pockets support for the blades which are firmly fixed by a pin.
The wheel with its drive can be assembled in the place of the chain.

WEIGHT:
390 to 530 kg following the equipment.

CHARACTERISTICS TRACTORS
Power: 20 to 45 CV (15 - 34 kw).
Attachment 3 points category 1 or 2, 540 towers taken of standard force.
It is necessary to have a hydrostatic transmission or speeds crawling with reduction of at least 10:1. Weights can be necessary in front of the tractor, especially with the system of collecting.
A hydraulic flow of 10 l/m with 150 bars is necessary for the conveyor. Please consult us by giving the characteristics

Studied especially for the sports grounds, its use potential is very important: craft industry and industry (pose cables, pipes….), sporting agriculture and surfaces (drainage)… The AFT 45 can be used with a very solid chain or a wheel for the narrow trenches, with the option collecting and loading of spoil, leaving a very clean ground. Gone up on mini tractors having speeds hydrostatic or crawling, you have a trenchers for part of the price of a motorized trenchers. The IDEAL EQUIPMENT FOR the SPORTS GROUNDS FOR the INSTALLATION OR the EXPANSION OF SYSTEMS OF DRAINAGE OR IRRIGATION.

IT OFFERS:
- A clear trench, quickly.

- A considerable choice of dimensions of work: widths of 125 with 200mm and up to 1.2 meters of deep

ur with chain, and from 40 to 100 mm with the wheel of cutting until a depth of 45cm. (of distinct dimensioned well give saving in fill and labour materials)

- A wheel at high speed for the narrow trenches.

- In option, a system of collecting and loading of spoil in vehicles which follow, leaving very clean surface. This system functions with the chain like with the wheel.

- A chain 63.5mm with rollers solid and completely detachable.

- Hydraulic Control of depth.

- Parallelogram for the support of a laser cell or a target with manual or automatic control with electromagnetic sluice gates.

>> CHARACTERISTIC
BLADES AND TEETH
Steel blades silicone manganese with edge of reloaded work. Option of points carbides tungsten for the hard or abrasive grounds. The blades of the wheel of cutting are reversible to double their working life. For the hard grounds of the teeth carbides tungsten can be gone up in all the small pockets, that is to say in some.

DIMENSION DISTINCT
Chains: choice of maximum depths of 80, 100 or 120 cm and widths of 125, 150 or 200 Misters.
Coil cutting: choice of blades for widths of 40, 50, 60, 70 or 100mm and up to 45 cm of depth.

TRANSMISSION
Catch of force 6 grooves with clutch of safety. Case bevel gearbox involving the chain directly. The wheel is pulled by an additional transmission chain.

COLLECTING AND LOADING
A system of collecting and loading of spoil with hydraulic conveyor can be assembled with the chain like with the wheel, leaving a very clean surface.